This is a great product for those who want to brew the smoothest, most flavorful coffee possible!But I think perhaps some people don't want to deal with choices in how they prepare their coffee and would rather have the convenience of automation (and pre-packaged blandness)--in which case the CafeSolo, while fairly simple to use, may not be for them.
Better Than...
I started out with a drip coffee maker.After years of making sometimes bitter, sometimes thin, but never great tasting coffee, I looked into Chemex.I was still not satisfied with the pleasant but weak brew that resulted.Finally, I read a rave review of the Eva Solo product on a coffee specialist site.The reviewer (an editor for the site) said he found the CafeSolo to produce a far better brew than either a French press or a vacuum pot, partly because it controls the temperature so well.I like the idea of a full immersion brewing system, so I bought it and immediately produced a very strong cup of the most bitter-free coffee I've ever tasted.I never drink coffee black, yet I was able to drink the result without adding sugar, and still found no bitterness!
The CafeSolo is better than a French press in two other ways.The conical mesh filter is ideally shaped to prevent blockage (the grounds sit outside the inverted cone when you pour), yet has very fine holes.So you can use a finer grind than you would for a French press and won't get any mud in your cup or problems pouring through the filter.As others have mentioned, the pourer and lid are of excellent design.But I said the CafeSolo was better in two other ways.The last reason has to do with the perils of complete extraction.
The Problem with Complete Extraction
"What's wrong with complete extraction?" you ask.The grounds get maximum saturation, so you get the most flavor, right?Yes, and that is why the CafeSolo, or a French press, or an espresso machine will yield a more concentrated brew.But there is a price for all that, in the risk of over-extracted bitterness.If you look at how coffee tasters do a cupping, they pour boiled water into a cup of grounds, let it steep for 1-2 minutes, then gently stir and push the crust of floating grounds to the bottom while taking in the aroma, and lastly remove the remaining floating bits.Then they let the brew continue to steep and cool for another 1-2 minutes before they take their first sip.They will also repeat this tasting as it cools further.During this time, they don't stir the grounds again.That extra agitation at the end of the brewing cycle must be avoided.
Now in an espresso machine, the parameters of temperature, pressure, size of grind, and time of extraction are carefully controlled to minimize over-extraction during the very intense brewing cycle of 15-20 seconds.But during the longer 4 minute steep time of the CafeSolo or a French press, there will be an unavoidable build-up of bitter liquid and over-extracted fine particles in the grounds.With the French press, the act of pushing the plunger down forces liquid through the grounds, flushing the concentrated bitterness and fine particles into the rest of the liquid.The CafeSolo does not have a plunger.The carafe is tilted for pouring and the floating grounds settle under the inverted cone-shaped filter.The liquid flows over the grounds and through the wire mesh, as opposed to being forced through the grounds in order to exit the carafe.As some baristas have reported, the result is the closest thing to an actual cupping, only cleaner.It's for this reason that the CafeSolo tends to be very forgiving, yielding the least bitterness and the most flavor.
The Way of Coffee
Coffee making is an art.If you want a truly outstanding result, you have to refine your technique:
1)I found that I couldn't control the extraction consistently.Also my grounds would have too much fine powder.So I stopped using a blade grinder and bought a KitchenAid Pro Line burr grinder--that solved the problem.(The KitchenAid also does a great job of controlling static explosions of coffee grounds.)
2)I was not happy with the coffee beans.My coffee seemed to be lacking in rich flavor, and dark roasts seemed to have just one flavor: burnt.I stopped buying the stale beans from the supermarket and the over-roasted beans from the popular coffee houses.I tried internet suppliers (2-3 weeks since roast).For the first time, I could taste the flavor profile they described.Eventually I found a local roaster (1-4 days since roast), and my coffee has never been so rich and flavorful (both light and dark).
3)After switching to better coffee, I found that minute changes in the grind and amount greatly affected the result.I was able to fine-tune the setting on my grinder to my liking (I now use a setting of "3" on my KitchenAid).And I bought a small narrow glass container with markings on the side to measure the grounds.I use approx. 10 tbsp., but YMMV--the actual amount is somewhere between 9 and 10 level tbsp., depending on how careful you are (also note that I like a strong cup with sugar and arf 'n' arf).The measuring jar allows me to get a consistent amount without the tedium of measuring out one tbsp. at a time and still getting it wrong.Recently, I discovered it has one other benefit.Because I transfer the grounds from the KitchenAid's catcher jar to my measuring jar using a scoop, I noticed that most of the fine powder was left behind.This will contribute to a cleaner and less bitter cup.
4)Eventually I also came to realize that darker roasted coffees may benefit more from a higher pressure extraction, as you get from an espresso machine.The CafeSolo does bring out the most amazing flavor down to a med-dark roast, but may not be superior for a dark roast.I do get good results from Illy espresso roast, but I think I've had better Illy in a restaurant.
Instructions
Ok, now for the mechanics of how I use the product to brew the perfect cup:
1)Boil 1 liter of water and pour into CafeSolo.Top with filter and lid to heat entire aparatus.
2)Boil another 1.25 liters of water.Use fresh, good tasting (filtered or bottled) water.Do not reboil previously boiled water or it will adversely affect flavor.
3)While second batch of water is coming to a boil, grind beans.Just before it boils, transfer water that was heating CafeSolo into a thermal carafe to warm it.Then pour the fresh coffee grounds into bottom of CafeSolo.
4)Wait 20 seconds after second batch of water boils to let it cool to the right temperature, then pour it into CafeSolo.Stir to control foam and mix up floating grounds, until water level is approx. 1 inch below narrowest point on neck of carafe.Place filter/lid on top, zip the neoprene jacket, and set timer for 4 minutes.
I was surprised at how fresh roasted and ground coffee reacted when I poured in the hot water.There was a hugebloom of foam and grounds that would have overflowed the carafe if I didn't start stirring (I'm told fresh roasted coffee can foul some automatic drip machines for this reason).With the CafeSolo, you end up perfecting your pour and stir technique to get the lid on and the jacket zipped before too much heat loss.
Speaking of heat loss, Coffeegeek mentions that they measured acceptable temperatures using this jacket, whereas a French press would quickly lose 10 degrees or more within just a few minutes.I recall some consumer on a certain cooking site confidently declaring that the temp would drop too much over 4 minutes and the jacket would do no good--all without apparently validating their claims by actually using the product (genius).
5)After 4 minutes, pour out water from thermal carafe and pour coffee from CafeSolo into thermal carafe.Coffee is ready to drink.
If you leave the coffee in the CafeSolo, the grounds will continue to extract and the brew will begin to taste bitter after another 6 mins.Also, I found that mixing up the liquid by pouring it into another carafe always results in a better tasting cup.(This is all relative--that first pour is still better than anything I could produce using other coffee makers.)
Cleanup:Place old discarded conical metal coffee filter from now-departed loathsome drip coffee maker into sink drain.Rinse Eva filter and carafe grounds into old filter, drain and shake out into trash can.Wash inside of CafeSolo carafe (and thermal carafe, if you used one) with hot soapy water using a long flexible brush.Use hot soapy water on the mesh filter, too.
Hope this helps.:-)
Click Here to see more reviews about:
Eva Solo Cafe Solo Coffee Maker Designer Coffee - 1.0 LProduct Description: The Café Solo is a complete coffee making solution. Spoon fresh ground coffee directly into the heat resistant glass flask, add boiling water and stir. Insert the filter funnel and a smart tip-up lid will automatically open when you pour.
Get 13% OFF
Want to buy
Eva Solo Cafe Solo Coffee Maker Designer Coffee - 1.0 L at other amazon sites? Click the corresponding icon below:
Purchased to replace a Mr. Coffee that finally gave up the ghost.Had comparable features like auto brew timer and auto shut off.Will be replacing it soon with another Mr Coffee. When you pour the first and second cups you can expect to make a mess with the dribble carafe. It is difficult to fill the coffee maker with water without making another mess. I dont know why they added a splash bar across the fill area but it does make filling it with water a challenge.On the positive side the brew timer and suto shut off work well and it makes coffee as you would expect. The big down side is that useability is lacking.
